AIR CAM® Adjustable Walker Boot
The AIR CAM® Adjustable Walker Boot is an orthotic designed for people with a lower extremity disability to treat stable fractures and sprains. The device has a lowered rocker design and CAM adjustability ranging from neutral to 45° plantar/dorsiflexion with the turn of a screw. Unique ankle joint allows easy access adjustment and aluminum uprights for further customization. Fix the ankle or prescribe a range of motion. Also has a pneumatic liner for a more natural gait with increased support an
Dynacast Extra Casting Tape
The Dynacast Extra Casting Tape is a lightweight and durable low tack synthetic cast bandage. To apply, dip tape in cold water and wrap as for a plaster cast. The tape will set in three to five minutes. SIZES: Two separate sizes are available including 2 inches x 4 yards, and 4 inches by 4 yards. COLORS: Blue, white, purple, and pink.
Ezeform & Ezeform Light Splinting Material (Models A57701, A57702 & A57710)
The Ezeform and Ezeform Light Splinting Material are designed for use by individuals with upper and lower extremity disabilities requiring a customized splint. Ezeform is a strong, durable, thermoplastic synthetic that provides a resistant stretch with superior draping and conforming qualities. Its excellent rigidity make it ideal for hand, knee, ankle and body splints, and it requires no reinforcement. Both Ezeform and Ezeform Light, a lightweight version of the former, soften in hot water and
Gysona / Gypsona "s" Casting Material
The Gypsona/Gypsona "S" Casting Materials are splinting materials designed for use by individuals with upper and lower extremity disabilities. The material consists of a creamy consistency with durable molding properties. LPL4 sets in four minutes and LPL2 sets in 2 minutes. Casts made of Gypsona casting material can be removed by soaking in warm water and unraveling the material. DIMENSIONS: Gypsona, Gypsona "S" LPL2 Super Fast and Gypsona "S" LPL4 Fast, are all available in rolls measuring
Hapla Fleecy Foam
Hapla Fleecy Foam is splint material padding designed for use in splints and orthotics. This soft, self-adhesive medical-grade open-cell foam can be used to line splints or to cushion pressure areas to prevent skin breakdown and increase comfort. DIMENSIONS: 3/16 x 9 x 18 inches.
Hapla Fleecy Web
Hapla Fleecy Web is splint material padding designed for use in splints and orthotics. This soft, self-adhesive material has a slightly raised felt surface and can be stretched in one direction to make it more conforming. This cotton material can be used to line splints, especially around the thumb, or to cushion pressure areas to prevent skin breakdown and increase comfort. DIMENSIONS: 9 x 16 inches.
Orthopedic Felt (Model A4383)
Orthopedic Felt, model A4383, is splint material padding designed for use in splints and orthotics. These self-adhesive sheets are made of polyester, polypropylene, and viscose. DIMENSIONS: Each sheet is 0.25 x 7.5 x 15 inches.
Orthopro Stretch Night Splint
The Orthopro Stretch Night Splint is a night foot splint designed for use by individuals with lower extremity disabilities. Features include an anti-rotation bar, suspended heel, and adjustable toe post. The splint covers incorporate Bacti-Ban, which is odor resistant and keeps the covers cleaner. This night splint also features adjustable straps for optimal stretch and a non-skid safety bottom. A toe wedge is included. SIZE: Small, medium, and large.
Plastazote Foam Material
Plastazote Foam Material is splinting material and foam padding designed for use with individuals with arthritis or other upper or lower extremity disabilities. This material is heat-activated by heating in a 285-degree oven, after which it can be formed into soft, lightweight splints, cervical collars, or shoe inserts. The material can also be laminated by placing one piece on top of another and heating. This material is available in sheets or in rolls with self-adhesive backing. DIMENSIONS: T
Polyflex Ii & Polyflex Light Splinting Material
Polyflex II and Polyflex Light Splinting Material are designed for use with individuals with upper extremity disabilities. This material offers a combination of intimate conformability and resistant stretch. It also offers excellent drapability, conforming well to contours to provide a seamless splint. Minimal handling is required and the material should be handled on a horizontal plane and the splint formed in a gravity-assisted position. Recommended for individuals with joint pain or irritati
Polyform & Polyform Light Splinting Material
Polyform & Polyform Light Splinting Material are designed for creating splints for persons with upper extremity disabilities, joint, or neck disabilities. Polyform is a synthetic-based material that softens in hot water and can be shaped to custom fit arms, wrists and joints in a comfortable cast. Both Polyform and Polyform Light provide natural drape and easy stretch for a smooth, intimate fit. The edges can be trimmed and smoothed, yet each splint is rigid with no need for reinforcement. A
Rolyan Airthru Splinting Material
Rolyan AirThru Splinting Material is designed for creating custom-fabricated splints for individuals with upper or lower extremity disabilities. Designed to breathe and be soft and comfortable, this material has a rigid perforated external layer combined with a soft, breathable four-way stretch pad of foam and nylon. Available styles include Rolyan AirThru Aquaplast-T and Rolyan AirThru San-Splint. DIMENSIONS: The AirThru Aquaplast is available in sheets of 1/8 x 18 x 24 inches or 1/16 x 18 x 24
Rolyan Aquaplast Resilient-T & Original Resilient Splinting Material (Models A96261, A96263C4 & A96262C4 )
Aquaplast Resilient-T Splinting Material and Aquaplast Original Resilient Splinting Material are designed for use by individuals with upper or lower extremity disabilities or back injuries. Recommended for large splints, splints requiring frequent revisions, serial splints, spasticity splints, elbow and back splints, ankle stirrup splints, foot drop splints, and when splinting uncooperative patients, this material is translucent when heated, allowing for identification of landmarks for positioni
Rolyan Aquaplast Ultra Thin Edging Material (Model A96422)
Aquaplast Ultra Thin Edging Material, model A96422, is a splinting material designed to provide smooth edge reinforcements on splints made of Aquaplast materials (see separate entries). The thin, thermoplastic material resembles tape and softens using a heat gun or hot water and bonds instantly to the splint. DIMENSIONS (WxL): 0.75 inch x 25 feet. COLOR: White.
Rolyan Aquaplast Watercolors Peds Pac (Model 556042)
Aquaplast Watercolors Ped's Pac, model 556042,is a set of pre-packaged splinting materials designed for use by children or small adults with upper or lower extremity disabilities. This bright, moldable material offers a controlled stretch for easy contouring and its elastic memory allows for repeated remolding for economical splint revisions. The non-stick coating provides ease of handling and prevents accidental bonding. The package includes seven solid sheets and one OptiPerf perforated sheets
Rolyan Aquaplast Watercolors Splinting Materials
Aquaplast Watercolors Splinting Materials are bright, moldable splinting materials designed for use by individuals with upper or lower extremity disabilities. Available in solid or OptiPerf perforated styles, the materials offer a controlled stretch for easy contouring. Its elastic memory allows for repeated remolding for economical splint revisions and its non-stick coating provides ease of handling and prevents accidental bonding. DIMENSIONS: 1/8 x 18 x 24 inches, 3/32 x 18 x 24 inches, or 1/1
Rolyan Aquaplast-T & Original Aquaplast Splinting Material
Aquaplast-T and Original Aquaplast Splinting Material are used to create flexible, customized splints for persons with upper or lower extremity disabilities. Both the Aquaplast-T and the Original Aquaplast become transparent when soft, providing a visual clue they are ready to mold and simplifying thd need to landmark and observe pressure points while shaping the material. Both materials soften easily in hot water and allow for repeated remolding for economical splint revisions. Aquaplast-T is
Rolyan Aquatubes Splinting Tubes
Aquatube Splinting Tubes are splinting materials designed for use by indiviuals with upper extremity disabilities. The thermoplastic, low temperature tubes simplify splint fabrication when making dynamic outriggers or hinges. Ideal as a line guide to direct the angle of pull and eliminate snagging of outrigger traction lines, the tubes bond instantly to all Smith & Nephew Rolyan splinting materials. DIMENSIONS: All tubes are two feet long: The tubes are available in a choice of 3/16 inch ou
Rolyan Gel Shell Pads (Model A847900)
The Rolyan Gel Shell Pads, model A847-900, are wound care products designed to reduce hypertrophic scar formation in addition to cushioning pressured areas for individuals using splints. These pads feature a mineral oil make-up designed to help soften and desensitize scarring. These hand-washable pads feature a self-adhesive backing and can be cut to customize individual splints. DIMENSIONS: 4.5 x 9 inches.
Rolyan Introductory Splinting Kit (Model A783101)
The Rolyan Introductory Splinting Kit, model A783101, is a set of products designed to enable medical and therapy professionals to fit and create splints for people with upper or lower extremity disabilities, including splinting material, splint straps, velvet loop material for Velcro, and a goniometer. Included in this kit is one sheet of solid Aquaplast Resilient-T, sheets of solid Ezeform, Aquaplast ProDrape-T, Synergy, and Polyflex II (see also separate entries). This kit also offers pieces
Rolyan Port-A-Splint Kit (Model A4264)
The Rolyan Port-A-Splint Kit is a splinting material, tool, and cast heater kit that keeps splintmaking essentials neat and organized. The kit contains an electric heat pan, heat gun, cutting board, five Rolyan splinting materials (Polyflex II , Polyform, Ezeform, Synergy, and Aquaplast-T; see also separate entries), Pro Snips, Fiskars Scissors, utility knife, Samson All-Purpose Hole Punch, and a lightweight carrying case. DIMENSIONS: The splinting material is provided in 1/8 x 6 x 9 inch sheets
Rolyan San-Splint Splinting Material
San-Splint is splinting material designed for use with individuals with upper or lower extremity disabilities or spinal injuries. This Isoprene rubber-based material provides a high degree of control, maximum resistance to stretch, and rigidity without reinforcement. Available in solid or perforated sheets and recommended for medium to large splints, back supports, spasticity splints, body jackets, functional position splints, shoe orthotics, and resting mitt splints, this material can be worked
Rolyan Silicone Elastomer (Models A643-1K, A643-6, & A643-5K)
Rolyan Silicone Elastomer is a liquid style elastomer designed to help reduce scar formation. It is additionally constructed to help custom-mold soft splints (finger positioning and other applications) to the user's preference. This product can also provide shock absorption for splints and is non-toxic and non-irritating. It consists of a silicone elastomer and an elastomer catalyst to control set up time. These kits come complete with mixing sticks, measuring cups and instructions. Model A643-1
Rolyan Tension-Adjustable Finger Loops / Slings
The Rolyan Tension-Adjustable Finger Loops/Slings are finger cuffs designed for use with splints. These Ultrasuede Slings and Loops come with pre-attatched 40-pound test nylon monofilaments and precise traction force can be quickly achieved by sliding the monofilament through the aluminum connecting pieces. The saddle-style Loops and Slings accommodate swollen fingers. DIMENSIONS: The Loops are available in 3 or 4 inches and the Slings are available in 2.5 or 3 inches.
Roylan Aquaplast Prodrape-T Splinting Material (Models A96266 & A96266C4)
Aquaplast ProDrape-T Splinting Material models A96266 and A96266C4 are designed for use with persons with upper extremity disabilities. Recommended for serial splinting, splinting of painfuil or irritated joints, outrigger splint bases, or splints for the finger, hand or thumb, the materials stretche easily and have excellent drapability to conform to contours. One hundred percent memory permits repeated heating and economical splint revisions. Available in solid and OptiPerf perforated sheets,
Sherpa Lining Material
Sherpa Lining Material is splint material padding designed for use in splints and orthotics. This polyester sheepskin-like material can be used to line splints or to cover a bed or chair to cushion pressure areas to prevent skin breakdown and increase comfort. This material can be machine washed and dried. DIMENSIONS: 1 yard x 60inches.
Synergy Splinting Material
Synergy Splinting Material is designed for use with individuals with upper and lower extremity disabilities requiring customized, molded splints. Available in perforated and solid sheets, the moldable material softens in hot water in 60 seconds and provides three to five minutes of working time. Resistant to fingerprinting and stretching, this material stays in place while contours are molded and retains its shape without reinforcement. A permanent bond is formed when heated edges are pinched to
TensoWrap is splinting material designed for use with individuals with upper or lower extremity disabilities. This material has a knitted outer layer of nylon and Lycra and an elastromeric foam inner layer for minimum to moderate elasticity and linear stretch. Recommended for customized supports, compression wraps, and knee wraps, this material provides an alternative to neoprene wraps. DIMENSIONS: Available in rolls of 2 inches x 10 yards, 3 inches x 5 yards, 4 inches x 5 yards, and 6 inches x
TensoWrap-Nu is splinting material designed for use with individuals with upper or lower extremity disabilities. This material has a knitted outer layer of nylon and Lycra and an elastromeric foam inner layer for moderate elasticity and multi-directional stretch. Recommended for customized supports, this material provides an alternative to neoprene wraps. DIMENSIONS: Available in rolls of 2.5 x 18 inches, 2.5 x 36 inches, 2.5 x 48 inches, 4 x 18 inches, 4 x 36 inches, 4 x 48 inches, 6 x 18 inch
W-Clear High-Temperature Thermoplastic
W-Clear High-Temperature Thermoplastic is splinting material designed for use with individuals with upper or lower extremity disabilities or facial disabilities. This transparent thermoplastic heats at 325 to 350 degrees Fahrenheit and can be used for orthotics, splints, and face masks. This material can be vacuum-formed or shaped over a plaster mold with gloved hands. Minor modifications are possible using a heat gun. DIMENSIONS: 1/16 x 18 x 24 inches or 1/8 x 18 x 24 inches.
X-Lite (Hexlite) Thermoplastic is splinting material designed for fabricating lightweight, well-ventilated splints for children or for people with arthritis and other upper or lower extremity disabilities. This material is self-bonding, so splint rigidity can be increased by using multiple layers. This material can also be used for seating/positioning inserts or for building up handles on tools and utensils. DIMENSIONS (WxL): Available in rolls of 6 x 72 inches. COLORS: White