At Ease Monitor Risers (Models Vr200 & Vr100)
The At Ease Monitor Risers, models VR200 and VR100, are monitor stands designed to raise the monitor to eye level to prevent neck or back strain. The Monitor Risers, both one inch and two inch, stack and interlock for maximum adjustability, flexibility and stability. The two inch risers have storage space underneath to increase workspace. DIMENSIONS: Both measure 11.25 x 11.25 inches. VR200 is 2-1/8 inches tall and VR100 is 1-1/8 inches tall. WARRANTY: One year limited.
Ergotron Neo-Flex Widescreen Lift Stand (Model 33-329-057)
The Ergotron Neo-Flex Widescreen Lift Stand, model 33-329-057, is a monitor stand designed for use in accessible computer work stations.
This stand enables light-touch adjustments of larger displays for optimum viewing, including height adjustment, tilt up to 30 degrees, 360-degree pan, and portrait-to-landscape rotation (90 degrees). It supports monitors from 20 to 32 inches, measured diagonally, and weioghing 16 to 36 pounds. Cables can be routed behind the stand. The unit includes the stand,
The MiniCart is a rolling cart or monitor stand designed to allow ease of access to small equipment such as small monitors, fax machines, or postage meters. The cart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and front locking casters prevent rolling when mobility is not required.
DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to work on a computer in a reclined position. The monitor must be placed above the user with the face angled downward. To accomplish this, a commercially available monitor support arm was modified. The monitor mounting plate was removed and replaced with a plywood plate attached to the pivoting sub-base with a pair of hinges. Threaded rod, rod couplings, and steel flat stock were used to fa
Tilt 'n Turn Crt Stand With Copy Easel
The Tilt 'n Turn CRT Stand with Copy Easel, model R7431, is a monitor stand designed to reduce glare, minimize eye strain, and eliminate neck craning. The stand fits any CRT with foot separations up to 12 x 12 inches. A built- in tension spring allows full range of adjustment while in use. Anti-skid pads on the top and bottom provide stability and protection. The stand tilts up or down 12.5 degrees, and rotates 360 degrees. DIMENSIONS: Copy easel is 9.5 x 12.5 inches; stand is 14 x 14.5 x 4.5 in
Vuryser Max Plus (Model Vur 7255)
VuRyser Max Plus, model VUR 7255, is a monitor stand designed to raise a computer monitor to eye level. Each stackable unit elevates the monitor 2 inches. Units support up to 60 pounds, and can also be used for printers, faxes, and other office machines. These stands have four pockets for storing paper or envelopes. DIMENSIONS (HxLxW): 2 x 15 x 17 inches. COLOR: Black/graphite.
Workmod Neck Saver (Models Nc73581 & Nc73582)
The WorkMod Neck Saver is a computer monitor stand designed to elevate and position the monitor to prevent neck and back strain. The steel and chrome arm rotates 360 degrees and is adjustable to 9 inches above desktops. Model NC73581 attaches to the desktop using a clamp; the surface-mount model, no. NC73582, attaches to the desktop using mounting bolts (requires holes to be drilled). CAPACITY: 50 pounds.