Racquet and Paddle
6760 Utensil Handles
The 6760 Utensil Handles are foam holders that fit into palm of the hand. The holders have a hole in the center for eating utensils, personal hygiene items, activity brushes and crayons, and other items. The holders have an anchor strap that goes around the back of the hand, are contoured, and adjustable for fit. These devices may also be used as hand exercisers. SIZES: Small (1-inch diameter x 3 inches) and Large (1.5-inch diameter x 3.75 inches). COLOR: Blue, orange or red.
6766 Toy Holder
The 6766 Toy Holder is an adjustable grasping aid for the hand designed to allow a person without the ability to grasp to interact with a small toy in their hand. This snap on device has 2 Velcro bands used to hold a toy in place, and 3/4-inch webbing straps with snap closure that wrap around the palm and wrist. SIZE: One size fits all. COLOR: Rainbow strapping.
Ableware Tko Turning Knob Operator (Model H75310)
The Ableware TKO Turning Knob Operator is designed to assist individuals with limited manual strength or dexterity to grasp, turn, and open any non-round control knob or appliance handle. The turner consists of a large T-handle attached to a large round base with retractable pins on its bottom. When the turner is pressed onto a knob the pins contacting with the knob’s surface retract, while the remaining pins surround the knob for a secure grip. The turner can be used on irregular knobs, includi
Action Life Glove (Model Ag01)
The Action Life Glove is a gasping aid for hand designed for use by individuals with spinal cord injury or severe physical, neurological, or upper extremity disabilities. Available for the right or left hand, this glove is a double tunnel loop glove with two loops or straps. The smaller hook strap aids in grasping handles of pool cues, ping pong paddles, fishing rods, brushes, etc. The larger strap runs through a palmar loop and forms a closed fist for use with gym machines, free weights, etc. W
Adapted Table Tennis Racket.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapted table tennis racket for person without fingers. The racket fits onto the person's hand and wrist. Racket paddle is constructed from 1/4 inch plywood, two side supports are made from 3/4 inch aluminum strips that are slightly longer than the hand and wrist. Bolt the supports to the racket. Secure a soft quilted snow mitten without the thumb between the side supports and place two wide elastic straps around the mitten and supports for greater rac
Adapted Table Tennis Racket.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapted table tennis racket for person using a prosthetic hook. Racket paddle is constructed from 1/4 inch plywood, with a handle made from 3/4 inch wood. An outline of the hook is drawn on the handle, and a knife is used to cut out the shape of the hook. The hook should fit snugly to keep the racket secure while playing table tennis. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Jim Cowart TITLE: Teacher Made Devices for Archery, Badminton,
Arthwriter Hand Aid, The (Model F73514)
The Arthwriter Hand Aid, model F73514, is a grasping aid designed to provide grip assistance to individuals with hand or finger disabilities, particularly arthritis, missing fingers, or persons wearing hand casts. The device may be used to holds pencils, pens, razors, toothbrushes, or other utensils. The unit consists of a plastic ball with a 0.75-inch central hole. An enlarged thumbscrew on the side clamps the handle of the item inserted into the hole to secure it. DIMENSIONS: Ball is 3 inches
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Piece of foam rubber used as a base to hold parts or tools, enabling someone with limited grasp capability to pick things up. A piece of foam rubber of the desired size and resiliency is placed on the regular work surface. The resiliency of the material makes it easier for small items placed on it to be picked up. COMMENTS: For further information contact: Leonard Anderson, Cerebral Palsy Research Foundation of Kansas Rehabilitation Engineering Center,
Grasping Cuff With Wrist Support (Model 9464)
The Grasping Cuff with wrist support, model 9464, is a grasping aid for hand designed to provide grasping capabilities for people with limited hand function and good arm strength. The Grasping Cuff fastens around the wrist with a D- ring Velcro closure. One end wraps over the fingers to form a closed fist around the handle of a racquet, pool cue, pole, etc. The cuff is made of suede leather and lined with Dycem to prevent slipping, and fits the right or left hand.
Magnetic Wand 7.5In
The Magnetic Wand 7.5in is a magnetic grasping aid for hand for persons with limited manual dexterity. The wand has a magnet on one end, and was designed for use with the World Wide Games Bingo Chips (see separate entry) so the chips are easier to move on the board and to pick up. COLOR: Assorted. DIMENSIONS: 7.5 inches long.
Polly Power Grip
The Polly Power Grip is a grasping aid for hand designed for use by individuals with arthritis and other grasping disabilities. This lightweight tool has vise-like jaws that adjust to varying widths and that close by squeezing the handles and open by pulling the handles apart. This device aids in providing a firmer grip with more power for pushing, pulling, picking up, turning, squeezing, or holding. This tool can be used to turn keys; open bottles, tubes, small jars, medicine bottles (including
Rolyan Walker Splint (Models A7671 To A7674)
The Rolyan Walker Splint, models A7671 to A7674, are splints designed to help individuals with arthritis and neurological disabilities to securely grasp a walker handle. It features wrist straps for stability and is made from Polyform splinting material with a Kushionflex pad. The splints can be specifically adapted to each user by using a heat gun or hot water. Available for right- or left-handed use. DIMENSIONS: Determined by width of 2nd to 5th metacarpal phalangeals (MCPs). Small/Medium is 3
Table Tennis Ball Retriever
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Long handled table tennis ball retriever for use by someone with limited mobility or who is unable to bend over to pick up items from floor. A commercial golfer' s rake with a 12 foot telescopic handle is purchased and the opposite side of the rake end is modified with a ball retriever. Two pieces of metal strapping material are attached in a cross pattern. The ends are shaped to easily spring open over a ball when downward pressure is applied. Include
CUSTOM ADAPTATION PURPOSE: To enable an individual with use of only one arm to throw a tennis ball up to strike it with the racquet. A strip of Velcro was cut to the appropriate length to strap around the user’s disabled arm. A piece of electrical conduit was cut to form a cup and attached to the Velcro with a Lexan plate. The user places the tennis ball in the cup and raises his foreshortened left arm to throw the ball up. He then uses the right hand to serve. TITLE: One-handed Tennis. JOURNAL
Tennis Wheelchair is a custom adaptation to a wheelchair customized for Noam to play tennis with better balance. Tikkun Olam Makers' Team Noam successfully built a solution to customize Noam’s wheelchair to better balance it for tennis play. It was accomplished by designing a removable counterweight that attaches to the chair when needed. The design mimics the weight distribution of a leg and attaches to the chair adjacent to Noam’s left leg. The solution was built by a 3D scan of Noam’s sitting
Textured Grip Ball (Model H70858)
The Textured Grip Ball, model H70858, is a hand exercise ball with a surface made of small individual bumps and a center hole. There is an internal bell which rings when shaken. The end of the hole may be pushed through with a pencil to create a pencil holder for persons requiring a built-up writing instrument holder. DIMENSIONS: 2 inches in diameter.