CORONAVIRUS (COVID-19) RESOURCE CENTER Read More
Category: General Input Interfaces

DIY Stylus

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

The DIY Stylus is a do it yourself stylus designed for those individuals with upper extremity disabilities to use.

Technical Specifications: 
Step One: Gather materials.
  • Plastic highlighter.
  • 3-foot bare wire.
  • Small piece of conductive foam*.
  • Electrical tape.
  • Pliers.
  • Scissors.
  • Plastic highlighter.

* Where to get conductive foam – TechAccess (see organization).

Step Two: Start by removing the innards of the highlighter. Using pliers remove the tip, and the felt ink well by removing the end plug of the highlighter.

*Maker will be left with these parts: an empty highlighter shell, the end plug, and the cap.

Step Three: Thread your wire through the barrel of the highlighter so that the maker has the wire coming out both ends.

Step Four: Tightly wrap the wire around your piece of foam, which should be cut into something about the size of a pen cap. Make sure the wire is tightly wound.

Step Five: Grabbing the other end of the wire, pull the foam into the highlighter so that just 1/4-inch of the tip remains to show. This is the pointer for your stylus.

Step Six: Wrap the remaining wire around the barrel of the highlighter, making sure that the wire covers the highlighter from top to bottom. A hand touching this wire is what creates the charge to control the touch screen.

Step Seven: Using your electrical tape, wrap the barrel of the highlighter with the electrical tape. Many fun colors are available.

Step Eight: Trim the foam at the tip to a rounded point. Do not trim too close. Leave about 1/4 of an inch of foam for the user's stylus tip.

Available

Price Check
as of: 
03/19/2019
Seller(s): 

Made By:

TechACCESS of Rhode Island
TechACCESS of Rhode Island Organization Type: 
Distributor
Public
TechACCESS of Rhode Island was founded in 1991 to provide assistive technology (AT) services to people with disabilities.
Address: 
Email address: techaccess@techaccess-ri.org
Phone: (401) 463-0202
Fax: (401) 463-3433
Phone (International): 
1 (800) 916- 8324
Web Address: 
TechACCESS of Rhode Island